Mobile Fuel Filtration & Robotic Tank Cleaning System – MFS03
Fuel purification and polishing service can be given through this all-in-one mobile system.
MFS03TM is one of the most comprehensive and technological vehicle that can be used for critical fuel purifying mission, especially designed to be used for retail fuel stations.
It provides an all-in-one capability for periodic tank service and cleans fuel from sludge, dirt, unknown particles and water. After separation, purified fuel will be sent back to the tank and sludge/dirt stored for disposal.
Main Benefits of MFS03TM
- All-in-one system
- Conserving environment
- Brings high quality fuel
- Cleans UCT
- Fast and reliable fuel cleaning
- Better wet-stock management
- Longer lifetime for both tank and dispenser
System Basics
- Year: 2022
- Power: 200 hp
- Strong chassis, 20 tons haul capacity
- Fuel type: Diesel – Euro6
- Special CTM Gearbox created for water-jet, hydraulics and vacuum pump
- PLC
- Tanks
- Robots
- Remote Management Software
- Robot size
- Tank capacity
- Filter numbers
- Fuel filter types
- Truck haul capacity
- Driver camera: to control driver cabin
- Tank camera: to check tank area
- PLC camera: to over-watch PLC station
- Used for water pressure cleaning and sucking
- Carries waterjet supply and suction pipe
- Uses special rubber pallet
- Can be used for gasoline and diesel
- Used to clean vapor and gas inside tank
- 4 gas filters
- ISO 9001:2015
- ATEX certified (all related parts)
- Health and Safety Standards
- International Standards
- 6 of 3-inch pneumatic stainless steel valves
- 8 of 2-inch pneumatic stainless steel valves
- 9 of 1-inch pneumatic stainless steel valves
- Used for sucking sludge and water
- 3.000 lt / min
- ATEX certified
- 200 bar
- 4.000 m3 / hour
- Pumps clean fuel back into tank
- 11 m3 / hour
- 2 fuel filters
- ATEX certified
- 100 lt / min
- 8 bar
- All valves are PLC and remote controlled
- 24w contactors
- 3 emergency stop buttons
- 3 camera/sensor system (PLC and Tank)
- DVR camera controller
- Gas detector sensors
- Internet modem
- 10″ touch-screen PLC control panel
- 12″ iPad control panel
- 19″ touch-screen driver control panel
- Gear-stick for robot
- Special PLC software
- Fire extinguisher
- 6 Flow-meters
- Special reporting mechanism
- Report management
- 16m 3-inch hose
- Hydrolic air cooler
- 3 of 1-inch safety valve
- 3 of 3-inch check valve
- 3 liquid level probe
Right Fuel Tank
- Suction tank
- 3.000 lt capacity
- Stainless steel
- Gasoline or diesel
Left Fuel Tank
- Suction tank
- 3.000 lt capacity
- Stainless steel
- Gasoline or diesel
Top Fuel Tank
- Clean fuel tank
- 3.000 lt capacity
- Stainless steel
- Gasoline or diesel
Water Tank
- Used for water container
- Uses flow-meter
- 100 lt capacity
Sludge Tank
- Used for sludge container
- Uses flow-meter
- 100 lt capacity
Hydrolic Tank
- Used for air pressure
- 100 lt capacity
- 4 Active-carbon filters
- 3 fuel filters
- 3 diesel filters
- 5 bar pressure
- 900 lt / min
- ATEX certified
- Used for opening centrifuges
- 500 kg haul capacity
- ISO certified
- 2 big centrifuge used for fuel filtration
- Separates fuel, water and sludge
- 2.000 lt/hr
- Used to clean tanks and fuel tank surface
- 300 bar
