Mobile Integrated Fuel LAboratory System – ML02
ML01TM is all-in-one laboratory to provide fuel quality check, water check, degasing tank, extract Nitrogen from the tank, tank and line tightness test and safe man entry into the tank.
ML02TM is one of a kind complete laboratory system to help critical tank service at retail stations, with all safety measures.
Main Benefits of ML01TM
- All-in-one system
- Conserving environment
- Fuel quality check
- Water existence / level test
- Fast and reliable test results
- Cleans tank from nitrogen
- Provides safe environment for man entry into tank
System Basics
- Year: 2022
- Power: 200 hp
- Strong chassis, 20 tons haul capacity
- Fuel type: Diesel – Euro6
- Special CTM Gearbox created for water-jet, hydraulics and vacuum pump
- PLC
- All pumps
- Robots
- Remote Management Software
- Robot size
- Tank capacity
- Filter numbers
- Truck haul capacity
- Driver camera: to control driver cabin
- Tank camera: to check tank area
- Cabin camera: to over-watch laboratory cabin
- Used for analysing inside the tank
- Carries camera, light and air quality sensor
- Carries 4″ suction hose
- Uses special rubber pallets
- Can be used for gasoline and diesel tank
- Used to clean vapor and gas inside tank
- 4 gas filters
- ISO 9001:2015
- ATEX certified (all related parts)
- Health and Safety Standards
- International Standards
- Used for sucking sludge and water
- 3.000 lt / min
- ATEX certified
- 200 bar
- 4.000 m3 / hour
- 2 small centrifuge used for gas filtration
- Separates Nitrogen
- 1.000 m3 / min
- 100 lt / min
- 8 bar
- 500 kg haul capacity
- Used for man and robot entry into the tank
- ISO certified
- All valves are PLC and remote controlled
- 24w contactors
- 3 emergency stop buttons
- 3 camera/sensor system (PLC and Tank)
- DVR camera controller
- Gas detector sensors
- Internet modem
- 10″ touch-screen PLC control panel
- 12″ iPad control panel
- Gear-stick for robot
- Special PLC software
- Fire extinguisher
- 6 Flow-meters
- Special reporting mechanism
- Report management
- 16m 3-inch hose
- Hydrolic air cooler
- 3 of 1-inch safety valve
- 3 of 3-inch check valve
- 3 liquid level probe
- VIP lab office
- Hydrolic scissors
- Led flashlights, Zone 0
- X-AM 8000 multigas detector
- 3 types of face masks
- Safety clothing
- 70kVA – 56 kw
- Provides massive electricity for all equipment
- Serves electricity to air compressor
- Serves electricity to diesel pump
- Serves electricity to hydraulic pump
- Serves electricity to vacuum pump
- Serves electricity to hydraulic air cooler
- Serves electricity to PLC panel
- Serves electricity to air dryer
- Serves electricity to oxygen supply
- Portable fuel analyzer for Gasoline and Diesel
- Contamination detection
- 10″ industrial full color touchscreen
- Smart 2+1 cell design
- Laser controlled system
- Full spectrum PLS Analysis
- Beam splitter: Ge-coated KBR
- Bubble free system
- Thermoelectric temperature regulation
- Remote access, anywhere, anytime
- Coulometric KF titration with automatic drift determination and correction
- Standard methods for various applications such as water %, water ppm, water with KF oven
- Statistical functions including average deviation
- Configurable output: Short, Standard and Curve
- Formula editor for individual calculations
- Output of results in ppm, %, mg, µg
- Suitable for the determination of bromine number
- Titration stand
- Air hose line
- Water hose line
- Electricity line
- Suction hose line
- Oxygen line
